1. <wbr id="b9uf0"></wbr>
    <sub id="b9uf0"></sub>

      <dd id="b9uf0"><address id="b9uf0"><nobr id="b9uf0"></nobr></address></dd>
    1. <wbr id="b9uf0"></wbr>
      topline | Ms. 13905984761
      中文版  |  English

      News

      Current Location:HomePage> News

      Checking and Adjusting the Tension of Bulldozer Tracks---Fujian Bulldozer Guide Wheel

      * : * : admin * : 2021-05-14 11:27:08 * : 0
      Checking and Adjusting the Tension of Bulldozer Tracks---Fujian Bulldozer Guide Wheel

      1. Check

      Park the vehicle on a level ground without stepping on the brakes, and place a straight rod above the supporting wheel and the guide wheel. When the distance between the rod and the grouser at the center is 20~30mm, the track will tighten Degree is standard. ---Fujian bulldozer guide wheel

      2. Adjustment

      In order to tighten the tensioner, press the butter into the oiler. On the contrary, in order to loosen the tensioning device, the stopper should be rotated in the reverse direction slowly to squeeze out the butter. If the butter is pressed in until S is 0mm, the tensioning device is still loose, which indicates that the pin sleeve is seriously worn and thinned. Please contact your local Shantui dealer to repair or replace the track.
      If the plug or other parts are loosened too much, the parts will easily fly out under the high pressure of the butter. If the butter cannot be pressed in smoothly, the vehicle can be moved back and forth for a certain distance. ---Fujian bulldozer guide wheel
      百姓快3首页